Welcome, How May We Help You? (Log In Register)

Page  2  of 2 | Next
Sort
View
Show
  • Products (50)
  • Solvent Inlet Filters

    Thermo Scientific
    For HPLC Systems Stainless steel 10µm inlet filters for longer lifetime No tools required for replacement Bottom-of-the-Bottle solvent filters: Efficient draw 100% PTFE polymer, including 2µm filter Built-in helium sparge port and frit
  • Purge Valve

    Agilent Technologies
    Common to all 1100/1200 pump modules, the purge valve has a gold seal held in place with a plastic cup The most frequently replaced item in the 1100/1200 Series pumps is the purge valve PTFE frit, which can clog with seal material or solvent particulates When replacing the frit, remember that…
  • Solvent Filters for G1311/12/54A Pumps

    Agilent Technologies
    Unfiltered solvents or solvents contaminated with microbial growth can clog solvent inlet filters, reducing the lifetime of the filter and impacting pump performance. Remember to clean or replace the solvent inlet filters at least once every 3 months.
  • Injection Valve Maintenance

    Agilent Technologies
    Rotor seal replacement is the most common injection valve maintenance procedure.
  • Seals And Pistons

    Agilent Technologies
    Pump seals should be replaced when there are leaks on the bottom of the pump head, when retention times are inconsistent, or when the pressure ripple is unstable. Each time the seals are replaced, the pistons (plungers) should be examined for scratches. Scratched pistons will cause small leaks…
  • Rheodyne Series 7725i

    Agilent Technologies
    Stainless steel Most popular injection valve for analytical HPLC Loops range from 1 ?l to 5 ml (20 ?l loop installed) Built in position sensing switch provides the LC with reproducible start signal Selected as Agilent 1050 and 1100 manual injectors
  • LC Fittings and Unions

    Agilent Technologies
    Different columns have different fitting requirements. (Zorbax columns use standard Swagelok fittings) Agilent 1100 modules use standard Swagelok fittings Rheodyne injection valves require Rheodyne fittings How do you choose the correct fittings? To ensure leak-free connections, and to prevent…
  • Fluorescence Detector

    Agilent Technologies
  • Slipfeee Ferrules

    Thermo Scientific
    For use with SLIPFREE connectors for HPLC columns Vespel ferrules replace the standard Vespel ferrules supplied with SLIPFREE column connectors Kel-F and PEEK are offered for applications in which Vespel is not suitable
  • Autosampler Supplies

    Agilent Technologies
  • 1100/1200 Needles and Needle Seats

    Agilent Technologies
    The needle should be replaced when it becomes bent, burred or blunt. The needle seat should be replaced when it is leaking or plugged. You should suspect a leak if you notice a trail of buffer crystals on the needle seat. The needle seat can become blocked if the sample contains particulates, as…
  • HPLC Tubing

    Agilent Technologies
  • Detector Lamps for Shimadzu Instruments

    Thermo Scientific
    Low cost long-lasting deuterium lamps to fit most spectrophotometers and detectors. Thermo Brand Deuterium Lamps offer Best-in-Class spectral stability as well as superior lamp lifetime to insure that you get full value from each and every lamp. These lamps are engineered to be sure you get the…
  • Injection Valve Replacement Parts

    Agilent Technologies
    Rotor seals wear with use and need routine replacement Stators only need replacement if the ports are damaged PEEK rotor seals are incompatible with concentrated nitric and sulfuric acids
  • Outlet Ball Valve

    Agilent Technologies
    Before exchanging the outlet ball valve, try cleaning it in a sonicator by placing the valve in an upright position (onto the plastic cap) in a small beaker with alcohol. Sonicate for 5 to 10 minutes. The 1100/1200 Series binary pump has a different outlet ball valve which includes a sieve.
  • Autosampler Kits

    Agilent Technologies


Please Log In

Don't have an Account? Create one now.